FEATURES High resistance to sunlight, Elastic structure, High mechanical and chemical resistance, Can be applied on top of mourning, It also requires oven drying. It can also be used as. Resin Structure: Acrylic resin / Aliphatic isocyanate Description: Acrylic Topcoat is a two-component, fast-drying, acrylic aliphatic isocyanate-based, shiny-looking topcoat paint. Top Coat Application: After opening the Acrylic Top Coat package, it is homogenized by mixing thoroughly, preferably with a drill motor, and mixed with Acrylic Hardener at the specified rate. Acrylic Thinner is added at the recommended rate to bring the mixture to application viscosity. It gives the mixture application viscosity. (In spraying applications, the application viscosity should be adjusted to 16” - 18” / DC4 / 20°C) It is recommended to apply the acrylic topcoat to give a dry film thickness of at least 40 - 50 µ. If wet-on-wet application is not to be done, 45 minutes must be waited for the second coat application for coat acceptance. Notes: During Application: Air temperature between 5°C and 50°C, Temperature of the application surface between 10°C and 30°C, Relative Humidity Important Reminders: In order to avoid any health problems or fire hazards, necessary ventilation must be provided in applications carried out in closed environments. In cases where more than one coat application is required without wet-on-wet application, if 72 hours have passed between coats, light sanding should be done. Mixtures in appropriate amounts should be prepared according to the work order and continued until the entire mixture is consumed. At the end of the work, all painting equipment used during application should be thoroughly treated with ACUSAS Acrylic Thinner. To ensure complete curing, 18 hours should be waited before using the painted surface. Technical Information: Color: produced in desired colors. Gloss: Glossy Density: 1.15 ± 0.05 g/ml. Solids %: 62 ± 2 by weight, 50 ± 3 by volume. Drying Times: Powder Dry 30 – 40 minutes / 20°C, Touch Dry 1 hour / 20°C, Assembly Drying 3 hours / 20°C, Full Drying 10 hours. Mixing Ratios: 3 Part Acrylic Topcoat by weight, 1 Part Acrylic Hardener, 1 Part ACUSAS Polyurethane Thinner (varies upon request). It gives the mixture application viscosity. Pot Life: 3 hours / 20°C. Application Viscosity: 16” - 18” / DC4 / 20°C (spray - airless) Thinner to Use: ACUSAS Acrylic thinner. Application Methods: Spray (airless). Recommended Dry Film: 40 - 50 µ Thickness. Paintable Area: 10 - 12.5 m2 / lt (to give a dry film thickness of 40 - 50 µ). Packaging Life: At least 1 year in unopened packaging. (at room temperature) Flash Point: Health and Safety When used improperly, Acrylic Topcoat can have hazardous substances and create a fire hazard. Therefore, necessary precautions should be taken during storage, transportation and use. Symbol: Xn, F Hazard Warnings: R 11 - 20 / 21 / 22 Safety Warnings: S 16 - 20 / 21 -24 / 25 - 38 General Warnings Use only in well-ventilated areas with a mask and do not inhale. The product features listed above have been arranged according to the latest technology standards and laboratory test results and are based on recommendations. When using the product, the described conditions, the prevailing local situation and other materials to be used must be taken into consideration. To get the best results, appropriate devices and application features should be taken into consideration. IT SHOULD BE KEPT AWAY FROM FLAME AND FIRE.