FEATURES 100% amide based; solvent combination. It has excellent resistance to chemical and physical effects and can be used easily on all kinds of metal and concrete surfaces. Giving the surface a bright and smooth appearance APPLICATION FEATURES For 19kg of epoxy paint, 4kg is mixed until a homogeneous mixture is obtained. Pot life is 6 hours. STORAGE 2 years in a cool place, covered and protected from frost and direct sunlight Resin Structure: Epoxy Definition: Epoxy Topcoat is an epoxy resin-based topcoat paint with a glossy or semi-matte appearance, which is extremely resistant to chemical and physical effects. Features: Excellent resistance to chemical and physical effects. It can be used easily on all kinds of metal and concrete surfaces. It gives the surface a bright and smooth appearance. Areas of Use: Epoxy Topcoat can be easily applied as a topcoat on metal and concrete surfaces exposed to chemicals such as acids and bases, and on all epoxy primer and intermediate coat systems applied to metal surfaces in ports and industrial facilities. Application: After the ACUSASEpoxy Topcoat package is opened, it is homogenized by mixing thoroughly, preferably with a drill motor, and mixed with the Epoxy Hardener at the specified rate. Epoxy Thinner is added at the recommended rate to bring the mixture to application viscosity. It gives the mixture application viscosity. (In spraying applications, the application viscosity should be adjusted to 18” - 21” / DC4 / 20°C, and in brush and roller applications, it should be adjusted to 25” - 40” / DC4 / 20°C.) In order for the Epoxy Topcoat to provide the expected performance, it is recommended to apply it as a topcoat over recommended primers to give a dry film thickness of at least 50 microns. If wet-on-wet application is not to be done, 4 hours must be waited for the second coat application to be accepted. Notes During Application: Air temperature between 5°C and 50°C, Temperature of the application surface between 10°C and 30°C, Relative Humidity Important Reminders: In order to avoid any health problems or fire hazards, necessary ventilation must be provided in applications carried out in closed environments. In cases where more than one coat application is required without wet-on-wet application, if 72 hours have passed between coats, light sanding should be done. Mixtures in appropriate amounts should be prepared according to the work order and continued until the entire mixture is consumed. At the end of the job, all paint equipment used during application should be thoroughly coated with Epoxy Thinner. After the application, the surface should not be contacted with water for at least 36 hours. To ensure complete curing, 7 days must be waited before using the painted surface. 7 days to complete drying. Mixing Ratios: 2 parts Epoxy Topcoat by weight, 1 part Epoxy Topcoat Hardener, 1 part Epoxy Thinner (varies upon request). It gives the mixture application viscosity. Pot Life 24 hours / 20°C Application Viscosity: 18” - 21” / DC4 / 20°C (spray - airless), 25” - 40” / DC4 / 20°C (brush - roller) Thinner to Use: ACUSASEpoxy thinner Application Methods: Brush, Roller, Spray (airless) Recommended Dry Film: 50 micron Thickness. Paintable Area: 13.5 m2 / lt (to give a dry film thickness of 50 microns) Packaging Life: At least 1 year in unopened packaging. (at room temperature) Flash Point: Health and Safety ACUSASEpoxy Topcoat may have hazardous substances and create a fire hazard if used improperly. Therefore, necessary precautions should be taken during storage, transportation and use. Symbol: Xn, F Hazard Warnings: R 11 - 20 / 21 / 22 Safety Warnings: S 16 - 20 / 21 -24 / 25 - 38 General Warnings Use only in well-ventilated areas with a mask and do not inhale. The product features listed above have been arranged according to the latest technology standards and laboratory test results and are based on recommendations. When using the product, the described conditions, the prevailing local situation and other materials to be used must be taken into consideration. To get the best results, appropriate devices and application features should be taken into consideration. IT SHOULD BE KEPT AWAY FROM FLAME AND FIRE.