FEATURES It is a two-component polyurethane alkyd and isocyanate combination elastic paint with permanent gloss and high mechanical and chemical resistance. Its physical and chemical properties are very It is a superior finish. Its resistance to UV rays is very high. Provides excellent adhesion. It dries quickly. TECHNICAL SPECIFICATIONS OF THE PRODUCT * Appearance: Glossy topcoat paint. * Chemical structure: Combination of polyurethane alkyd resin and polyisocyanate. * Density: 1.30 – 1.35 gr/cm3 Varies depending on color. * Viscosity: 85KU – 90KU 25 oC * Thinner: ACUSAS polyurethane thinner. * Fineness: 5 microns * Solid matter amount: 40%-45% Varies depending on color. * Drying time: 8 hours at 20 oC / 30 minutes at 60 oC. * Flash point: below 20 oC. APPLICATION FEATURES Top chambered gun HVLP 1.3mm / conventional gun 1.3mm-1.4mm / bottom chambered conventional gun 1.6mm-1.8mm. AIR PRESSURE HVLP 2.5-3.5 BAR/ conventional gun 4 bar. The surfaces to be applied must be cleaned from all kinds of mechanical and chemical contamination. In order to get higher efficiency; Before applying the top coat, it is recommended to apply polyurethane primer to the surface. PREPARATION OF THE MIXTURE 3 kg of ACUSAS polyurethane hardener is added to 16 kg of ACUSAS polyurethane topcoat paint. MIXTURE USAGE LIFE 1.5-2 hours at 20 oC. DILUTION ACUSAS Polyurethane Thinner is thinned according to the application method and made ready for use. AREA THAT CAN BE PAINTED It varies depending on the condition of the surface and the method of application. STORAGE Store in closed packages, in a cool place, away from direct sunlight. The packaging should be kept closed when not in use. Precautions should be taken. Symbol: Xn, F Hazard Warnings: R 11 - 20 / 21 / 22 Safety Warnings: S 16 - 20 / 21 -24 / 25 - 38 General Warnings Use only in well-ventilated areas with a mask and do not inhale. The product features listed above have been arranged according to the latest technology standards and laboratory test results and are based on recommendations. When using the product, the described conditions, the prevailing local situation and other materials to be used must be taken into consideration. To get the best results, appropriate devices and application features should be taken into consideration. IT SHOULD BE KEPT AWAY FROM FLAME AND FIRE.