FEATURES Good adhesion, shiny appearance, very fast drying Resin Structure: Short oil Alkyd Definition: Cellulosic Topcoat is a single-component, very fast-drying, cellulosic resin-based topcoat paint with a glossy or semi-opaque appearance. Finishing Application: After opening the Cellulosic Topcoat package, it is homogenized by mixing thoroughly, preferably with a drill motor, and by adding Cellulosic Thinner at the specified rate, the application viscosity should be adjusted to 24” - 39” / DC4 / 20°C for roll applications.) In order to provide the expected performance, it is recommended to apply it as a topcoat on recommended primers, giving a dry film thickness of at least 50 µ. If a wet-on-wet application is to be made, at least 30 minutes must elapse after the primer application for air-drying primer applications. Notes: During Application: Air temperature between 5°C and 50°C, Temperature of the application surface between 10°C and 30°C, Relative Humidity Important Reminders: In order to avoid any health problems or fire hazards, necessary ventilation must be provided in applications carried out in closed environments. age upon age In cases where more than one coat application is required without application, if 60 hours have passed between coats, light sanding should be done. At the end of the job, all paint equipment used during application should be thoroughly cleaned with Cellulosic Thinner. After application, the surface should not be in contact with water for at least 36 hours. To ensure complete curing, 24 hours must be waited before using the painted surface. Technical Information: Color: It is produced in desired colors. Gloss: Matte, Semi-matte, Silk matte and Glossy types produced.. Density: 1.10 ± 0.05 g/ml. Solids %: 62 ± 2 by Weight, 52 ± 3 by Volume. Drying Times: Powder Dry 4 – 6 minutes / 20°C, Touch Dry 15 – 18 minutes / 20°C, Assembly Dry 50 – 60 minutes / 20°C, Full Dry 24 hours. Mixing Ratios: 10 parts by weight Cellulosic Topcoat, 1.5 parts Cellulosic Thinner (varies upon request), gives the mixture application viscosity. Application Viscosity: 17” - 20” / DC4 / 20°C (spray - airless), 24” - 39” / DC4 / 20°C (brush - roller). Thinner to Use: Cellulosic thinner. Application Methods: Brush, Roller, Spraying (spray - airless). Recommended Dry Film: 50 µ Thickness. Paintable Area: 10.5 m2 / lt (to give a dry film thickness of 50 - 60 µ). Packaging Life: At least 1 year in unopened packaging. (at room temperature). Flash Point: Health and Safety Cellulosic Topcoat may have harmful substances and create a fire hazard if used improperly. Therefore, necessary precautions should be taken during storage, transportation and use. Symbol: Xn, F, Hazard Warnings:R 11 - 20 / 21 / 22, Safety Warnings: S 16 - 20 / 21 -24 / 25 - 38 General Warnings: Use only in well-ventilated areas with a mask and do not inhale. The product features listed above have been arranged according to the latest technology standards and laboratory test results and are based on recommendations. When using the product, the described conditions, the prevailing local situation and other materials to be used must be taken into consideration. To get the best results, suitable devices and application features should be taken into account. SHOULD BE KEPT AWAY FROM FLAME AND FIRE